Enhancing enzymatic saccharification yields of cellulose at high solid loadings by combining different LPMO activities.

BACKGROUND: The polysaccharides in lignocellulosic biomass hold potential for production of biofuels and biochemicals. However, achieving efficient conversion of this resource into fermentable sugars faces challenges, especially when operating at industrially relevant high solid loadings. While it is clear that combining classical hydrolytic enzymes and lytic polysaccharide monooxygenases (LPMOs) is necessary to achieve high saccharification yields, exactly how these enzymes synergize at high solid loadings remains unclear. RESULTS: An LPMO-poor cellulase cocktail, Celluclast 1.5 L, was spiked with one or both of two fungal LPMOs from Thermothielavioides terrestris and Thermoascus aurantiacus, TtAA9E and TaAA9A, respectively, to assess their impact on cellulose saccharification efficiency at high dry matter loading, using Avicel and steam-exploded wheat straw as substrates. The results demonstrate that LPMOs can mitigate the reduction in saccharification efficiency associated with high dry matter contents. The positive effect of LPMO inclusion depends on the type of feedstock and the type of LPMO and increases with the increasing dry matter content and reaction time. Furthermore, our results show that chelating free copper, which may leak out of the active site of inactivated LPMOs during saccharification, with EDTA prevents side reactions with in situ generated H2O2 and the reductant (ascorbic acid). CONCLUSIONS: This study shows that sustaining LPMO activity is vital for efficient cellulose solubilization at high substrate loadings. LPMO cleavage of cellulose at high dry matter loadings results in new chain ends and thus increased water accessibility leading to decrystallization of the substrate, all factors making the substrate more accessible to cellulase action. Additionally, this work highlights the importance of preventing LPMO inactivation and its potential detrimental impact on all enzymes in the reaction.

Lytic polysaccharide monooxygenase activity increases productive binding capacity of cellobiohydrolases on cellulose.

Cellobiohydrolases are crucial for cellulose breakdown, but their efficiency on crystalline cellulose is hampered by limited access to single chain ends to initiate hydrolysis. As a result, they depend on enzymes like lytic polysaccharide monooxygenases (LPMOs), which directly target the crystalline cellulose surface. This study investigated how LPMO pretreatment affected the productive binding capacity of a Trichoderma longibrachiatum cellobiohydrolase, TlCBHI, on crystalline cellulose by applying an amperometric cellobiose dehydrogenase biosensor. After the 24-hour of LPMO pretreatment, the productive binding capacity of TlCBHI significantly increased in all reactions. However, with a shorter 5-hour LPMO pretreatment, minimal to no effect on productive binding capacity was observed. Of note, all LPMO reactions were inactivated around this time point. This delayed LPMO effect suggests that the improved binding capacity for cellulases does not directly result from cellulose chain cleavage by LPMOs but rather from the cellulose decrystallization following the oxidative cleavage.

Effect of yeast species and processing on intestinal microbiota of Atlantic salmon (Salmo salar) fed soybean meal-based diets in seawater.

BACKGROUND: Yeasts are gaining attention as alternative ingredients in aquafeeds. However, the impact of yeast inclusion on modulation of intestinal microbiota of fish fed plant-based ingredients is limited. Thus, the present study investigates the effects of yeast and processing on composition, diversity and predicted metabolic capacity of gut microbiota of Atlantic salmon smolt fed soybean meal (SBM)-based diet. Two yeasts, Cyberlindnera jadinii (CJ) and Wickerhamomyces anomalus (WA), were produced in-house and processed by direct heat-inactivation with spray-drying (ICJ and IWA) or autolyzed at 50 °C for 16 h, followed by spray-drying (ACJ and AWA). In a 42-day feeding experiment, fish were fed one of six diets: a fishmeal (FM)-based diet, a challenging diet with 30% SBM and four other diets containing 30% SBM and 10% of each of the four yeast products (i.e., ICJ, ACJ, IWA and AWA). Microbial profiling of digesta samples was conducted using 16S rRNA gene sequencing, and the predicted metabolic capacities of gut microbiota were determined using genome-scale metabolic models. RESULTS: The microbial composition and predicted metabolic capacity of gut microbiota differed between fish fed FM diet and those fed SBM diet. The digesta of fish fed SBM diet was dominated by members of lactic acid bacteria, which was similar to microbial composition in the digesta of fish fed the inactivated yeasts (ICJ and IWA diets). Inclusion of autolyzed yeasts (ACJ and AWA diets) reduced the richness and diversity of gut microbiota in fish. The gut microbiota of fish fed ACJ diet was dominated by the genus Pediococcus and showed a predicted increase in mucin O-glycan degradation compared with the other diets. The gut microbiota of fish fed AWA diet was highly dominated by the family Bacillaceae. CONCLUSIONS: The present study showed that dietary inclusion of FM and SBM differentially modulate the composition and predicted metabolic capacity of gut microbiota of fish. The inclusion of inactivated yeasts did not alter the modulation caused by SBM-based diet. Fish fed ACJ diet increased relative abundance of Pediococcus, and mucin O-glycan degradation pathway compared with the other diets.

Engineering cellulases for conversion of lignocellulosic biomass.

Lignocellulosic biomass is a renewable source of energy, chemicals and materials. Many applications of this resource require the depolymerization of one or more of its polymeric constituents. Efficient enzymatic depolymerization of cellulose to glucose by cellulases and accessory enzymes such as lytic polysaccharide monooxygenases is a prerequisite for economically viable exploitation of this biomass. Microbes produce a remarkably diverse range of cellulases, which consist of glycoside hydrolase (GH) catalytic domains and, although not in all cases, substrate-binding carbohydrate-binding modules (CBMs). As enzymes are a considerable cost factor, there is great interest in finding or engineering improved and robust cellulases, with higher activity and stability, easy expression, and minimal product inhibition. This review addresses relevant engineering targets for cellulases, discusses a few notable cellulase engineering studies of the past decades and provides an overview of recent work in the field.

Visible light-exposed lignin facilitates cellulose solubilization by lytic polysaccharide monooxygenases.

Lytic polysaccharide monooxygenases (LPMOs) catalyze oxidative cleavage of crystalline polysaccharides such as cellulose and are crucial for the conversion of plant biomass in Nature and in industrial applications. Sunlight promotes microbial conversion of plant litter; this effect has been attributed to photochemical degradation of lignin, a major redox-active component of secondary plant cell walls that limits enzyme access to the cell wall carbohydrates. Here, we show that exposing lignin to visible light facilitates cellulose solubilization by promoting formation of H2O2 that fuels LPMO catalysis. Light-driven H2O2 formation is accompanied by oxidation of ring-conjugated olefins in the lignin, while LPMO-catalyzed oxidation of phenolic hydroxyls leads to the required priming reduction of the enzyme. The discovery that light-driven abiotic reactions in Nature can fuel H2O2-dependent redox enzymes involved in deconstructing lignocellulose may offer opportunities for bioprocessing and provides an enzymatic explanation for the known effect of visible light on biomass conversion.

H2 O2 feeding enables LPMO-assisted cellulose saccharification during simultaneous fermentative production of lactic acid.

Simultaneous saccharification and fermentation (SSF) is a well-known strategy for valorization of lignocellulosic biomass. Because the fermentation process typically is anaerobic, oxidative enzymes found in modern commercial cellulase cocktails, such as lytic polysaccharide monooxygenases (LPMOs), may be inhibited, limiting the overall efficiency of the enzymatic saccharification. Recent discoveries, however, have shown that LPMOs are active under anoxic conditions if they are provided with H2 O2 at low concentrations. In this study, we build on this concept and investigate the potential of using externally added H2 O2 to sustain oxidative cellulose depolymerization by LPMOs during an SSF process for lactic acid production. The results of bioreactor experiments with 100 g/L cellulose clearly show that continuous addition of small amounts of H2 O2 (at a rate of 80 µM/h) during SSF enables LPMO activity and improves lactic acid production. While further process optimization is needed, the present proof-of-concept results show that modern LPMO-containing cellulase cocktails such as Cellic CTec2 can be used in SSF setups, without sacrificing the LPMO activity in these cocktails.

Effects of Yeast Species and Processing on Intestinal Health and Transcriptomic Profiles of Atlantic Salmon (Salmo salar) Fed Soybean Meal-Based Diets in Seawater.

The objective of the current study was to examine the effects of yeasts on intestinal health and transcriptomic profiles from the distal intestine and spleen tissue of Atlantic salmon fed SBM-based diets in seawater. Cyberlindnera jadinii (CJ) and Wickerhamomyces anomalus (WA) yeasts were heat-inactivated with spray-drying (ICJ and IWA) or autolyzed at 50 °C for 16 h (ACJ and AWA), followed by spray-drying. Six diets were formulated, one based on fishmeal (FM), a challenging diet with 30% soybean meal (SBM) and four other diets containing 30% SBM and 10% of each of the four yeast fractions (i.e., ICJ, ACJ, IWA and AWA). The inclusion of CJ yeasts reduced the loss of enterocyte supranuclear vacuolization and reduced the population of CD8α labeled cells present in the lamina propria of fish fed the SBM diet. The CJ yeasts controlled the inflammatory responses of fish fed SBM through up-regulation of pathways related to wound healing and taurine metabolism. The WA yeasts dampened the inflammatory profile of fish fed SBM through down-regulation of pathways related to toll-like receptor signaling, C-lectin receptor, cytokine receptor and signal transduction. This study suggests that the yeast species, Cyberlindnera jadinii and Wickerhamomyces anomalus are novel high-quality protein sources with health-beneficial effects in terms of reducing inflammation associated with feeding plant-based diets to Atlantic salmon.

Alginate Degradation: Insights Obtained through Characterization of a Thermophilic Exolytic Alginate Lyase.

Enzymatic depolymerization of seaweed polysaccharides is gaining interest for the production of functional oligosaccharides and fermentable sugars. Herein, we describe a thermostable alginate lyase that belongs to polysaccharide lyase family 17 (PL17) and was derived from an Arctic Mid-Ocean Ridge (AMOR) metagenomics data set. This enzyme, AMOR_PL17A, is a thermostable exolytic oligoalginate lyase (EC 4.2.2.26), which can degrade alginate, poly-ß-d-mannuronate, and poly-α-l-guluronate within a broad range of pHs, temperatures, and salinity conditions. Site-directed mutagenesis showed that tyrosine Y251, previously suggested to act as a catalytic acid, indeed is essential for catalysis, whereas mutation of tyrosine Y446, previously proposed to act as a catalytic base, did not affect enzyme activity. The observed reaction products are protonated and deprotonated forms of the 4,5-unsaturated uronic acid monomer, Δ, two hydrates of DEH (4-deoxy-l-erythro-5-hexulosuronate), which are formed after ring opening, and, finally, two epimers of a 5-member hemiketal called 4-deoxy-d-manno-hexulofuranosidonate (DHF), formed through intramolecular cyclization of hydrated DEH. The detection and nuclear magnetic resonance (NMR) assignment of these hemiketals refine our current understanding of alginate degradation.IMPORTANCE The potential markets for seaweed-derived products and seaweed processing technologies are growing, yet commercial enzyme cocktails for complete conversion of seaweed to fermentable sugars are not available. Such an enzyme cocktail would require the catalytic properties of a variety of different enzymes, where fucoidanases, laminarinases, and cellulases together with endo- and exo-acting alginate lyases would be the key enzymes. Here, we present an exo-acting alginate lyase that efficiently produces monomeric sugars from alginate. Since it is only the second characterized exo-acting alginate lyase capable of degrading alginate at a high industrially relevant temperature (≥60°C), this enzyme may be of great biotechnological and industrial interest. In addition, in-depth NMR-based structural elucidation revealed previously undescribed rearrangement products of the unsaturated monomeric sugars generated from exo-acting lyases. The insight provided by the NMR assignment of these products facilitates future assessment of product formation by alginate lyases.

Enzymatic processing of lignocellulosic biomass: principles, recent advances and perspectives.

Efficient saccharification of lignocellulosic biomass requires concerted development of a pretreatment method, an enzyme cocktail and an enzymatic process, all of which are adapted to the feedstock. Recent years have shown great progress in most aspects of the overall process. In particular, increased insights into the contributions of a wide variety of cellulolytic and hemicellulolytic enzymes have improved the enzymatic processing step and brought down costs. Here, we review major pretreatment technologies and different enzyme process setups and present an in-depth discussion of the various enzyme types that are currently in use. We pay ample attention to the role of the recently discovered lytic polysaccharide monooxygenases (LPMOs), which have led to renewed interest in the role of redox enzyme systems in lignocellulose processing. Better understanding of the interplay between the various enzyme types, as they may occur in a commercial enzyme cocktail, is likely key to further process improvements.

Quantification of soluble recalcitrant compounds in commercial thermal hydrolysis digestates.

Solid residues such as primary sludge (PS), waste activated sludge (WAS), and food waste (FW) can be stabilized through anaerobic digestion (AD). Application of the thermal hydrolysis process (THP) prior to AD results in several benefits in AD and dewatering. However, soluble recalcitrant compounds associated with Maillard reactions have been identified after THP which can impact downstream processes and water discharge limits. In this study, the soluble colloidal chemical oxygen demand, color, ultraviolet absorbance at 254 nm and dissolved organic nitrogen in seven full-scale THP facilities were quantified and compared. The THP substrate influenced the concentration of soluble melanoidin-associated compounds in the digestates. THP implementation in five water resource recovery facilities (WRRFs) was modeled and found to give a 3-8 mg/L increase on the water effluent COD concentration depending on the PS/WAS ratio. The results provide novel information useful in planning new WRRFs and optimization of existing facilities. PRACTITIONER POINTS: High amounts of WAS in substrate resulted in higher concentrations of CODsc, color and dissolved organic nitrogen in the digestate. Food waste treated at 145°C showed equal or lower concentrations of all components compared with sludge operated at 165°C. Installation of THP will increase the COD concentration in the water effluent of a water resource recovery facility. The characteristics of the THP substrate are important to consider in cost/benefit analysis when planning the installation of THP.

Production and characterization of yeasts grown on media composed of spruce-derived sugars and protein hydrolysates from chicken by-products.

BACKGROUND: A possible future shortage of feed protein will force mankind to explore alternative protein sources that can replace conventional soymeal or fishmeal. Several large industrial organic side-streams could potentially be upgraded to feed protein using a fermentation process to generate single cell protein. Yeast is the most widely accepted microorganism for production of single cell protein, because of its superior nutritional quality and acceptability among consumers. Here, we have assessed the growth of four different yeasts, Cyberlindnera jadinii, Wickerhamomyces anomalus, Blastobotrys adeninivorans and Thermosacc® Dry (Saccharomyces cerevisiae), on media composed of enzymatically saccharified sulfite-pulped spruce wood and hydrolysates of by-products from chicken, and we have characterized the resulting yeast biomass. RESULTS: Generally, the yeast grew very well on the spruce- and chicken-based medium, with typical yields amounting to 0.4-0.5 g of cell dry weight and 0.2-0.3 g of protein per g of sugar. B. adeninivorans stood out as the most versatile yeast in terms of nutrient consumption and in this case yields were as high as 0.9 g cells and 0.5 g protein per g of sugar. The next best performing yeast in terms of yield was W. anomalus with up to 0.6 g cells and 0.3 g protein per g sugar. Comparative compositional analyses of the yeasts revealed favorable amino acid profiles that were similar to the profiles of soymeal, and even more so, fish meal, especially for essential amino acids. CONCLUSIONS: The efficient conversion of industrial biomass streams to yeast biomass demonstrated in this study opens new avenues towards better valorization of these streams and development of sustainable feed ingredients. Furthermore, we conclude that production of W. anomalus or B. adeninivorans on this promising renewable medium may be potentially more efficient than production of the well-known feed ingredient C. jadinii. Further research should focus on medium optimization, development of semi-continuous and continues fermentation protocols and exploration of downstream processing methods that are beneficial for the nutritional values of the yeast for animal feed.

Spruce sugars and poultry hydrolysate as growth medium in repeated fed-batch fermentation processes for production of yeast biomass.

The production of microbial protein in the form of yeast grown on lignocellulosic sugars and nitrogen-rich industrial residues is an attractive approach for reducing dependency on animal and plant protein. Growth media composed of enzymatically saccharified sulfite-pulped spruce wood, enzymatic hydrolysates of poultry by-products and urea were used for the production of single-cell protein. Strains of three different yeast species, Cyberlindnera jadinii, Wickerhamomyces anomalus and Blastobotrys adeninivorans, were cultivated aerobically using repeated fed-batch fermentation up to 25 L scale. Wickerhamomyces anomalus was the most efficient yeast with yields of 0.6 g of cell dry weight and 0.3 g of protein per gram of glucose, with cell and protein productivities of 3.92 g/L/h and 1.87 g/L/h, respectively. Using the conditions developed here for producing W. anomalus, it would take 25 industrial (200 m3) continuously operated fermenters to replace 10% of the fish feed protein used in Norway.

Effects of post anaerobic digestion thermal hydrolysis on dewaterability and moisture distribution in digestates.

Organic waste fractions such as sewage sludge, food waste and manure can be stabilized by anaerobic digestion (AD) to produce renewable energy in the form of biogas. Following AD, the digested solid fraction (digestate) is usually dewatered to reduce the volume before transportation. Post-AD treatments such as the Post-AD thermal hydrolysis process (Post-AD THP) have been developed to improve the dewatering, but the mode of action is not well understood. In this study, samples from 32 commercial full-scale plants were used to assess the impact of Post-AD THP on a broad range of raw materials. Maximum dewatered cake solids after Post-AD THP was predicted by thermogravimetric analysis (TGA). Post-AD THP changed the moisture distribution of the samples by increasing the free water fraction. A consistent improvement in predicted dewatered cake solids was achieved across the 32 samples tested, on average increasing the dry solids concentration by 87%. A full-scale trial showed that dewatering Post-AD THP digestate at 80 °C improved dewatered cake solids above the predictions by TGA at 35 °C. In conclusion, dewatered cake solids were significantly improved by Post-AD THP, reducing the volume of dewatered cake for disposal.

CNash - A novel parameter predicting cake solids of dewatered digestates.

Efficient digestate dewatering is crucial to reduce the volume and transportation cost of solid residues from anaerobic digestion (AD) plants. Large variations in dewatered cake solids have been reported and predictive models are therefore important in design and operation of such plants. However, current predictive models lack validation across several digestion substrates, pre-treatments and full-scale plants. In this study, we showed that thermogravimetric analysis is a reliable prediction model for dewatered cake solids using digestates from 15 commercial full-scale plants. The tested digestates originated from different substrates, with and without the pre-AD thermal hydrolysis process (THP). Moreover, a novel combined physicochemical parameter (C/N•ash) characterizing different digestate blends was identified by multiplying the C/N ratio with ash content of the dried solids. Using samples from 22 full-scale wastewater, food waste and co-waste plants, a linear relationship was found between C/N•ash and predicted cake solids for digestates with and without pre-AD THP. Pre-AD THP improved predicted cake solids by increasing the amount of free water. However, solids characteristics like C/N ratio and ash content had a more profound influence on the predicted cake solids than pre-AD THP and type of dewatering device. Finally, C/N•ash was shown to have a linear relationship to cake solids and reported polymer dose from eight full-scale pre-AD THP plants. In conclusion, we identified the novel parameter C/N•ash which can be used to predict dewatered cake solids regardless of dewatering device and sludge origin.

Production, Characterization, and Application of an Alginate Lyase, AMOR_PL7A, from Hot Vents in the Arctic Mid-Ocean Ridge.

Enzymatic depolymerization of seaweed polysaccharides is gaining interest for the production of functional oligosaccharides and fermentable sugars. We describe a thermostable alginate lyase belonging to Polysaccharide Lyase family 7 (PL7), which can be used to degrade brown seaweed, Saccharina latissima, at conditions also suitable for a commercial cellulase cocktail (Cellic CTec2). This enzyme, AMOR_PL7A, is a ß-d-mannuronate specific (EC 4.2.2.3) endoacting alginate lyase, which degrades alginate and poly mannuronate within a broad range of pH, temperature and salinity. At 65 °C and pH 6.0, its Km and kcat values for sodium alginate are 0.51 ± 0.09 mg/mL and 7.8 ± 0.3 s-1 respectively. Degradation of seaweed with blends of Cellic CTec2 and AMOR_PL7A at 55 °C in seawater showed that the lyase efficiently reduces viscosity and increases glucose solublization. Thus, AMOR_PL7A may be useful in development of efficient protocols for enzymatic seaweed processing.

Comparative Assessment of Enzymatic Hydrolysis for Valorization of Different Protein-Rich Industrial Byproducts.

Hydrolyzed protein-rich byproducts from food production may find a variety of applications, for example, as rich ingredients of fermentation media. We have conducted a study of the enzymatic hydrolysis of three byproducts from Norwegian food industries: chicken byproducts, mixed pork and beef byproducts, and salmon viscera. The efficiency and optimization of the enzymatic hydrolysis were evaluated using endogenous enzymes alone and in combination with commercial proteases. Hydrolysis reactions were conducted with freshly thawed raw materials using short incubation times and including an initial temperature gradient from 4 to 60 °C to both harness the power of endogenous enzymes and minimize microbial contamination. Subsequently, hydrolysates were characterized by analyzing the total recovery of protein, the peptide molecular-weight distribution, and the composition of total and free amino acids. The action of endogenous enzymes played an important role in raw-material hydrolysis, particularly when hydrolyzing salmon viscera but less so when hydrolyzing chicken byproducts. For pork-beef and chicken byproducts, the addition of Alcalase or Papain improved protein recovery, reaching levels up to 90%. Next to showing efficient hydrolysis protocols, the present data also provide a comparison of the amino acid compositions of hydrolysates derived from these three different protein-rich byproducts. Growth studies showed that the obtained protein-rich hydrolysates from meat and fish industries are a promising alternative for expensive nitrogen sources that are commonly used for fermenting yeasts.

Microbial Protein Produced from Brown Seaweed and Spruce Wood as a Feed Ingredient.

The conversion of nonedible biomass to protein for use in feed is an attractive strategy toward improved sustainability in aquaculture. We have studied the possibility to produce protein-rich yeast Candida utilis on a medium consisting of enzymatically hydrolyzed sulphite-pulped spruce wood, mainly providing glucose, and enzymatically hydrolyzed brown seaweed, supplemented with ammonium sulfate. The results show that this blend constitutes a complete fermentation medium that enables good growth rates and cell yields. Results from a salmon feeding trial showed that the yeast can replace parts of a traditional fishmeal diet without harmful effects, although the apparent protein digestibility coefficient for the yeast was suboptimal. While further optimization of both the fermentation process and downstream processing is needed, the present proof-of-concept study shows a path to the production of microbial protein based on a simple, local and sustainable fermentation medium.

Use of high metal-containing biogas digestates in cereal production - Mobility of chromium and aluminium.

Biogas digestate use as organic fertilizer has been widely promoted in recent years as a part of the global agenda on recycling waste and new sustainable energy production. Although many studies have confirmed positive effects of digestates on soil fertility, there is still lack of information on the potential adverse effects of digestates on natural soil heavy metal content, metal leaching and leaching of other pollutants. We have investigated the release of aluminium (Al) and chromium (Cr) from different soils treated with commercial digestates high in mentioned potentially problematic metals in a field experiment, while a greenhouse and a laboratory column experiment were used to address mobility of these metals in two other scenarios. Results obtained from the field experiment showed an increase in total concentrations for both investigated metals on plots treated with digestates as well as a significant increase of water-soluble Al concentrations. Factors that were found to be mostly affecting the metal mobility were dissolved organic carbon (DOC), pH and type of soil. Metal binding and free metal concentrations were modelled using the WHAM 7.0 software. Results indicated that the use of digestates with high metal content are comparable to use of animal manure with respect to metal leaching. Data obtained through chemical modelling for the samples from the field experiment suggested that an environmental risk from higher metal mobility has to be considered for Al. In the greenhouse experiment, measured concentrations of leached Cr at the end of the growing season were low for all treatments, while the concentration of leached Al from digestates was higher. The high irrigation column leaching experiment showed an increased leaching rate of Cr with addition of digestates.

Post-anaerobic digestion thermal hydrolysis of sewage sludge and food waste: Effect on methane yields, dewaterability and solids reduction.

Post-anaerobic digestion (PAD) treatment technologies have been suggested for anaerobic digestion (AD) to improve process efficiency and assure hygenization of organic waste. Because AD reduces the amount of organic waste, PAD can be applied to a much smaller volume of waste compared to pre-digestion treatment, thereby improving efficiency. In this study, dewatered digestate cakes from two different AD plants were thermally hydrolyzed and dewatered, and the liquid fraction was recirculated to a semi-continuous AD reactor. The thermal hydrolysis was more efficient in relation to methane yields and extent of dewaterability for the cake from a plant treating waste activated sludge, than the cake from a plant treating source separated food waste (SSFW). Temperatures above 165 °C yielded the best results. Post-treatment improved volumetric methane yields by 7% and the COD-reduction increased from 68% to 74% in a mesophilic (37 °C) semi-continuous system despite lowering the solid retention time (from 17 to 14 days) compared to a conventional system with pre-treatment of feed substrates at 70 °C. Results from thermogravimetric analysis showed an expected increase in maximum TS content of dewatered digestate cake from 34% up to 46% for the SSFW digestate cake, and from 17% up to 43% in the sludge digestate cake, after the PAD thermal hydrolysis process (PAD-THP). The increased dewatering alone accounts for a reduction in wet mass of cake leaving the plant of 60% in the case of sludge digestate cake. Additionaly, the increased VS-reduction will contribute to further reduce the mass of wet cake.

Characterization of Pseudo-Lignin from Steam Exploded Birch.

There is a growing interest in a more wholesome utilization of biomass as the need for greener chemistry and non-mineral oil-based products increases. Lignin is the largest renewable resource for aromatic chemicals, which is found in all types of lignocellulosic biomass. Steam-explosion of lignocellulosic biomass is a useful pretreatment technique to make the polymeric material more available for processing. However, this heat-based pretreatment is known to result in the formation of pseudo-lignin, a lignin-like polymer made from carbohydrate degradation products. In this work, we have analyzed steam-exploded birch with a varying severity factor (3.1-5.0) by pyrolysis-gas chromatography-mass spectrometry, 2D-NMR, and Fourier transform infrared spectroscopy. The main results reveal a consumption of acetic acid at higher temperatures, with the increase of furan components in the pyrolyzate. The IR and NMR spectral data support these results, and there is a reason to believe that the conditions for humin formation are accomplished under steam explosion. Pseudo-lignin seems to be a humin-like compound.